9,000 lb 4-Post Lift + 2 Rolling Bridge Jacks Combo | Atlas PRO9000

9,000 lb 4-Post Lift with Twin Rolling Bridge Jacks

A 4-post lift is great for storage and quick service, but the moment you need to do brake work, suspension work, or tire rotation, the wheels are stuck on the runways. The fix is a rolling bridge jack that runs between the runways — and most shops end up buying the lift first, then realizing later they need the jack too.

This combo bundles the Atlas Garage PRO9000 9,000 lb portable 4-post lift with two RJ6 rolling bridge jacks that ride in the between-runway tracks. One package, one purchase, ready for wheels-off service from day one.

What’s Included

• Atlas Garage PRO9000 4-post lift
• 2x Atlas RJ6 rolling bridge jacks
• Truck adapter set for each rolling jack
• Caster kit with polyurethane wheels (lift)
• Steel approach ramps
• Steel jack tray
• 4 plastic drip trays
• Wheel stops
• 2 rubber wheel chocks
• All mounting hardware

Made For

Built for hobbyists and home garages that want full wheels-off service capability without buying a separate two-post lift — particularly for owners running larger trucks or doing frequent brake and suspension work.

• Serious home garages and hobby builders
• Project truck and restoration shops
• Diesel and dually truck owners doing wheels-off work
• Storage stackers who also need service capability
• Light commercial bays running mixed vehicle types

Features

• PRO9000 9,000 lb capacity — highest-capacity portable Garage PRO lift — fits large trucks and long-wheelbase SUVs
• Two RJ6 rolling bridge jacks — twin jacks let you lift front and rear of the chassis off the runways at the same time
• 199 1/2″ runway length — extra-long runways for long-wheelbase trucks
• Bridge-jack tracks between runways — built-in tracks accept the RJ6 jacks for wheels-off work
• Caster kit with polyurethane wheels — lift remains portable across the floor when needed
• Lock ladder with double-lock safety — redundant mechanical locks across the lifting range
• 110V electric operation — lift runs on standard 110V with a 30 amp breaker
• Complete accessory bundle — steel ramps, jack tray, drip trays, wheel chocks, wheel stops, and adapters all included

PRO9000 Lift Specifications

The PRO9000 is the heaviest and longest of the Atlas Garage PRO portable 4-posts. The 199 1/2-inch runways and 187-inch maximum wheelbase capability handle crew cab trucks and long-wheelbase SUVs that overhang shorter portable lifts. Outside-tire-to-outside-tire drive-thru of 97 1/4 inches lets diesel duallys drive on cleanly.

Column height of 95 3/4 inches and runway lift height of 85 inches give you enough space to stack a low car under the lifted vehicle for storage. The free-standing portable design means no anchoring — the caster kit lets you reposition the entire lift on its polyurethane wheels.

Twin RJ6 Rolling Bridge Jacks

The two included RJ6 rolling bridge jacks ride in the between-runway tracks built into the PRO9000. Each jack carries its own truck adapter set, so you can lift trucks and SUVs that sit higher than the average passenger car at the factory lift points without extra adapters to buy.

Running two jacks at once lets you lift the front and rear axles off the runways simultaneously — useful for full tire rotations, four-wheel brake service, or suspension work that needs all four wheels free. Each jack carries enough capacity to handle the chassis weight of any vehicle the PRO9000 will lift, so there’s no capacity bottleneck in the system.

The Right Lift and Rolling Jack Combo for Your Shop

At 9,000 lb of lift capacity with two RJ6 rolling bridge jacks bundled in, this combo gives a home garage commercial-grade wheels-off service capability without needing a separate two-post lift. The PRO9000’s 199 1/2-inch runways accommodate long-wheelbase trucks, and the twin jacks let you service front and rear axles at the same time.

Caster kit, steel approach ramps, steel jack tray, 4 plastic drip trays, wheel stops, 2 rubber wheel chocks, and a truck adapter set for each rolling jack all ship in the combo. 110V operation on a 30 amp breaker keeps the install simple — no upgraded electrical service required.

Don’t wait — scroll back up and click the orange Add to Cart button to get this lift and rolling jack combo on its way to your shop.

Specs

Technical Specifications

Manual

Owner’s Manual

Download the Atlas Garage PRO9000 + RJ6 Rolling Jacks Combo owner’s manual for installation instructions, maintenance guidelines, and safety information. Download Manual