8,000 lb Extended 4-Post Lift + 2 Rolling Jacks Combo | Atlas PRO8000EXT

Extended-Runway 8,000 lb 4-Post Lift with Two Sliding Bridge Jacks

Crew-cab trucks and full-size SUVs run wheelbases past 140 inches. A standard-runway 4-post lift leaves the tires hanging off the ends — or won’t accept the vehicle at all. Owners of truck fleets need extended runways to use the lift the way it was built to be used.

The Atlas Garage PRO8000EXT is the extended-runway version of the PRO8000 — same 8,000 lb hobbyist build, longer runways for extended-wheelbase trucks and SUVs, taller columns for higher lift. Paired with two RJ35 sliding bridge jacks, the bay handles storage plus real four-wheel service on the largest hobbyist vehicles.

What’s Included

• Atlas Garage PRO8000EXT extended-runway 8,000 lb 4-post lift
• Two (2) Atlas RJ35 sliding bridge jacks (3,500 lbs each)
• Caster kit with polyurethane wheels
• Steel approach ramps
• Steel jack tray
• Four (4) plastic drip trays
• Wheel stops
• Truck adapter set for each bridge jack

Made For

Built for hobbyists and restoration shops with long-wheelbase vehicles — crew-cab trucks, Suburbans, lifted Jeeps, and stretched-cab project rigs.

• Home garages servicing crew-cab trucks and full-size SUVs
• Restoration shops working on long-wheelbase project vehicles
• Collectors with mixed sedan / truck / SUV fleets
• Off-road and overland builders working on lifted trucks
• Hobbyists who want one lift that handles everything

Features

• 8,000 lb capacity — handles full-size trucks and SUVs at hobbyist duty cycles
• Extended runway design — longer wheelbase support than the standard PRO8000
• 84-1/4″ lift height to top of runway — more stand-up clearance than the standard PRO8000
• Two RJ35 sliding bridge jacks — 3,500 lbs each — service both axles at once
• Caster kit included — roll the lift out of the way when storing the project
• Steel approach ramps and jack tray — drive-on ready, jack storage included
• Truck adapter sets included — set per jack for raised-frame trucks
• 110V single-phase operation — fits a standard 30 amp shop circuit

Why Extended Runways Matter for Truck Owners

The PRO8000EXT’s runways are sized for the modern long-wheelbase truck — vehicles where standard lifts force you to choose between cantilevering the tires off the runway ends or skipping the lift entirely. With this lift, a crew-cab truck or full-size SUV sits with all four tires squarely on the runways from the front to the rear.

Combined with the 98-1/2″ column height and 79″ of clearance under the runways, the lift gives a six-foot operator full stand-up working room under the largest vehicles in the hobby fleet.

Two Bridge Jacks for Four-Wheel Service

A 4-post storage lift only does storage without bridge jacks — the tires sit on the runways. Adding two RJ35 sliding jacks turns the lift into a real service tool. Rotate all four tires in one cycle, do brake jobs front and rear without re-lifting, swap wheels for the trail run while the truck is already up.

Each jack handles 3,500 lbs, lifts 17-1/4″ above the runway with the included 1-1/2″ and 5″ adapters, and slides freely between the runways. The second jack pays for itself within a few weekends of real work.

The Right Extended 4-Post Combo for Your Shop

At 8,000 lbs capacity with the longer runways and taller columns of the EXT version, plus two RJ35 bridge jacks, this combo is sized for the hobbyist truck and SUV fleet. The 84-1/4″ lift height and 79″ of underbody clearance give serious working room — not a storage-only solution.

Caster kit, approach ramps, jack tray, drip trays, wheel stops, and truck adapter sets all ship in the crates. The bay is service-ready once the lift is installed and the 110V circuit is connected.

Don’t wait — scroll back up and click the orange Add to Cart button to get this combo on its way to your shop.

Specs

Technical Specifications